Bandpass Filters

Bandpass filters can be supplied in a variety of different technologies, including but not limited to coaxial ceramic, cavity, lumped, helical, waveguide, tubular and microstrip. Chebyshev response filters are available, as well as Bessel, Gaussian, linear phase, Butterworth, elliptical and other transfer function filters.
Additional Bandpass Filters:

With SMA Adapter Board

Standalone Version

MODBUS Wireless Radio

Smart Meters

ISM-Band Bandpass Filter

This TX/RX filter dramatically reduces adjacent and out-of-band interference to the ISM band (902-928 MHz), allowing higher data rates and improved range.

  • High Q, low loss
  • Extremely sharp lowside cutoff limits 800 MHz cellular-band noise and interference
  • Available with SMA adapter board or standalone

Designed for infrastructure ISM-Band users

  • Automated data collection
  • Dedicated monitoring
  • Data links

 

 

SMART METERING FILTERS
( 902-928 MHz ISM BAND & Ricochet circuit 33 cm)

Several standard filters are listed below with IMC Part Numbers and data sheets. Custom filters are also available; please contact IMC with your requirements.

F0=914.5 MHz BW= 24 MHzSMTIMC Part No. 928103(PDF)
F0=920 MHz BW= 19 MHzSMTIMC Part No. 930118(PDF)
F0=921.5 MHz BW= 22 MHzSMTIMC Part No. 937968(PDF)
F0=921.5 MHz BW= 15 MHzSMTIMC Part No. 938638(PDF)
F0=872 MHz BW= 15 MHzSMTIMC Part No. 938929(PDF)
F0=872.5 MHz BW= 22 MHzSMTIMC Part No. 939830(PDF)
F0=918 MHz BW= 15 MHzSMTIMC Part No. 940589(PDF)
F0=920 MHz BW= 13 MHzSMTIMC Part No. 940590(PDF)
F0=914.5 MHz BW= 24 MHzSMTIMC Part No. 942225(PDF)
F0=921.5 MHz BW= 15 MHzSMTIMC Part No. 942226(PDF)
F0=872.5 MHz BW= 22 MHzSMTIMC Part No. 942227(PDF)
F0=914.5 MHz BW= 24 MHzType ā€œNā€-F ConnectorsIMC Part No. 942573(PDF)
F0=914.5 MHz BW= 26 MHzType ā€œNā€-F ConnectorsIMC Part No. 943023(PDF)
F0=914.5 MHz BW= 24 MHzSMA-F ConnectorsIMC Part No. 942224(PDF)

High Performance X-Band Ceramic Filter

9-pole bandpass filter at 9.65 GHz with a 400 MHz 3 dB bandwidth requires only 0.57 square inches of PWB area, and is just 0.18” high.

• High-order selectivity characteristics
• Ideal for limited-space, high-reliability applications
• Low IMD - 5W CW, 20W peak
• Low microphonics
• Lightweight
• Choice of package metallurgy
• Hermetic or vented packages; Connectorized and SMT available

Rugged, high-performance
• Thermal Shock: MIL-STD-202-107A
• Mechanical Shock: MIL-STD-202-213B, 1000G, 0.5ms, any axis
• Life Test: MIL-STD-202-108A (125o C)